fast turn certificate
Get Quote

blog

Stay Updated With The Latest Insights, Trends, And Innovations In Electronics Manufacturing. Explore Expert Articles, Industry Analysis, And Technical Guides Curated By The fastturn Team.

PCB Drill Bit Types: two-edge two-flute, two-edge one-flute, and one-edge one-flute

PCB Drill Bit Types: ST vs UC and Regrinding Basics

Explore the main PCB drill bit types used in PCB manufacturing, including differences in shank diameter, drill structure, flute design, and ST vs UC geometry. This article also explains the basics of PCB drill bit regrinding, helping you understand how drill bit selection and regrind control affect hole wall quality, drilling stability, and tool life.
Common PCB standard thicknesses 0.8–2.0 mm with caliper

PCB Standard Thicknesses: How to Choose 0.8/1.0/1.2/1.6/2.0 mm for Cost, Impedance & Connector Fit

Choose the right PCB Standard Thicknesses: compare 0.8–2.0 mm options, applications, tolerances, stackup tips, and connector fit to reduce costs and accelerate production.
January 9, 2026
Read More >
Type 3 Multilayer PCB Board 8-layer stack-up: copper-foil outer layers vs core outer layers (L1–L8)

Multilayer PCB Board Stack-Up Guide: Type 3 Lamination & Design

Type 3 Multilayer PCB board stack-up explained: compare copper-foil, core-based and odd-layer laminations with tips on impedance, warpage and cost.
January 8, 2026
Read More >
HDI Type III multilayer PCB with sequential build-up and microvias

Understanding IPC Multilayer PCB Classification: From Type 3 Traditional Boards to HDI Design

Master IPC Multilayer PCB Classification with this practical guide to IPC-2221/2222/2226 — learn Type 3/4 vs. HDI types, pick the right stack-up for cost, manufacturability, and reliability.
January 8, 2026
Read More >
High-Density Interconnect

High-Density Interconnect (HDI) Explained: Microvia, Blind/Buried Vias & Materials Guide

High-Density Interconnect (HDI) guide: how microvias, blind/buried vias, laser drilling and advanced materials (RCC, aramid, ePTFE) boost PCB density and high-speed signal performance.
January 5, 2026
Read More >
Resin flow filling inner-layer copper in multilayer PCB; higher RC gives more fill

Prepreg PCB Selection Guide: Resin Content, Flow, and Thickness Explained

Prepreg PCB selection made simple: learn how resin content, flow and pressed thickness affect multilayer lamination—practical tips, charts, and stackups.
January 5, 2026
Read More >
USB-A edge connector fit and tolerance for 1.6 mm PCB business card with ENIG pads and bevel specs

PCB Business Card Guide: NFC Design, Costs & DIY Tips

Learn how to design and build a standout PCB business card — NFC, LED options, material & finish choices, realistic cost breakdown, and step-by-step DIY tips.
January 4, 2026
Read More >

put your parts
into production today

All information and uploads are secure and confidential

Supports：

STEP

STP

SLDPRT

IPT

PRT

SAT

IGES

IGES

IGS

CATPART

X_T

OBJ

STL

Get Instant Quote