fast turn certificate
Get Quote

blog

Stay Updated With The Latest Insights, Trends, And Innovations In Electronics Manufacturing. Explore Expert Articles, Industry Analysis, And Technical Guides Curated By The fastturn Team.

PCB Drill Bit Types: two-edge two-flute, two-edge one-flute, and one-edge one-flute

PCB Drill Bit Types: ST vs UC and Regrinding Basics

Explore the main PCB drill bit types used in PCB manufacturing, including differences in shank diameter, drill structure, flute design, and ST vs UC geometry. This article also explains the basics of PCB drill bit regrinding, helping you understand how drill bit selection and regrind control affect hole wall quality, drilling stability, and tool life.
RF PCB Design comparison: characteristics of RF/Microwave/Analog vs Digital PCBs

RF PCB Design Explained: Key Differences Between RF, Microwave, and Digital PCBs

Learn the essentials of RF PCB design—how RF and microwave PCBs differ from digital boards, key layout challenges, and what truly drives high-frequency performance.
February 4, 2026
Read More >
SMD vs Chip on Board LED encapsulation cross-section with chips, bond wires, and uniform phosphor layer

What Is Chip on Board (COB)? How It Works, COB LED vs SMD, and PCB Design Explained

Discover what Chip on Board (COB) technology is, how it works in PCB design, and why COB LEDs outperform SMD for brighter, seamless lighting.
January 28, 2026
Read More >
Pad Thermal vs thermal paste cross-section showing gap, compression and contact area

What Is Pad Thermal and How Does It Work – Thermal Pad vs Paste, IC Pad, and PCB Thermal Relief Explained

Learn what Pad Thermal really means in electronics and how it works in different contexts. This guide explains the differences between thermal pads and paste, how IC thermal pads improve chip cooling, and how PCB thermal relief pads enhance solderability — with practical design tips for better heat dissipation and reliability.
January 26, 2026
Read More >
Relay working principle: coil energizes, armature moves, NO/NC/COM contacts change state

What Is a Relay and How Does It Work? Wiring Diagrams, DPDT Schematic, and How to Test a Relay Explained

Learn what a relay is, how it works, and how to wire & test 4/5-pin and DPDT relays. Clear diagrams, step-by-step testing, relay tester tips, and pro PCB advice.
January 23, 2026
Read More >
8P4R 3216 SMT resistor network dimensions and footprint

SMT Resistor Network Explained: Types, Packages, and How Resistor Array Simplify PCB Design

Learn what an SMT resistor network (resistor array) is—types, packages, circuit options, and applications—to optimize PCB design, reliability, and assembly.
January 21, 2026
Read More >
Operator checking PCB panels with an AOI system for silkscreen and solder mask alignment.

Silkscreen PCB Guide: What It Is, Minimum Text Height, Pad Clearance, and Labeling Best Practices

Silkscreen PCB guide: what it is, minimum text height, pad clearance, color contrast, QR labels, fiducials, and multicolor tips for error-free assembly.
January 20, 2026
Read More >

put your parts
into production today

All information and uploads are secure and confidential

Supports：

STEP

STP

SLDPRT

IPT

PRT

SAT

IGES

IGES

IGS

CATPART

X_T

OBJ

STL

Get Instant Quote