fast turn certificate
Get Quote

blog

Stay Updated With The Latest Insights, Trends, And Innovations In Electronics Manufacturing. Explore Expert Articles, Industry Analysis, And Technical Guides Curated By The fastturn Team.

PCB accelerometer placement good vs bad

PCB Accelerometer Design Guide: Layout Tips for Accurate and Reliable Motion Sensing

Learn the essentials of PCB accelerometer design, including sensor placement, footprint rules, routing, soldering, and validation. This guide shows how to reduce stress, heat, and vibration effects for more accurate and reliable motion sensing.
Cross-section of a multi-chip module (MCM) with wire-bond and flip-chip dies on a shared substrate.

What Is a Multi-Chip Module (MCM)? Types, Benefits, and How It Works in High-Performance Electronics

Discover what a multi-chip module (MCM) is, how it works, and the key types—MCM-L, MCM-C, MCM-D, and MCM-Si—for faster, smaller, high-performance systems.
January 29, 2026
Read More >
Hierarchy of electronic packaging levels from component to PCB to system.

Understanding Electronic Packaging Levels and PCB Integration in Modern Electronic Systems

Discover how electronic packaging works—from chip-level to system-level integration. Learn the types, levels, and how PCBs connect electronic packages.
January 29, 2026
Read More >
Rigid-Flex PCB

7 Main PCB Types Explained: Differences, Structures, and Applications You Should Know

Discover 7 main PCB types — from single-sided to rigid-flex and backplanes. Learn their structures, materials, and real-world applications.
January 29, 2026
Read More >
Electronic Fuse IC vs glass fuse and polyfuse comparison

What is eFuse? Electronic Fuse Basics, Benefits, and PCB Uses

Learn what an eFuse (electronic fuse) is, how it works, and why it outperforms glass fuses and Polyfuse. Includes selection tips and key PCB applications.
January 28, 2026
Read More >
SMD vs Chip on Board LED encapsulation cross-section with chips, bond wires, and uniform phosphor layer

What Is Chip on Board (COB)? How It Works, COB LED vs SMD, and PCB Design Explained

Discover what Chip on Board (COB) technology is, how it works in PCB design, and why COB LEDs outperform SMD for brighter, seamless lighting.
January 28, 2026
Read More >
What Is Flux in Soldering: soldering iron, flux syringe, and solder wire on a green PCB.

What Is Flux in Soldering? How It Works, What’s Inside, and Why You Need It

What Is Flux in Soldering—learn what it’s made of, how it works, and why it’s essential for clean, strong solder joints in electronics and PCB assembly.
January 27, 2026
Read More >
QFN with bottom pads vs QFP with gull-wing leads

QFN Package Explained: Types, Structure, QFN With Lid, and How to Solder QFN Step-by-Step

Discover what a QFN package is, its types and structure, when to use a QFN with lid, and step-by-step tips on how to solder QFN packages perfectly.
January 27, 2026
Read More >
PCB cross-section comparing countersink and counterbore with copper keepout notes

What Is a Counterbore and How Is It Different From a Countersink?

Discover what a counterbore is, how it differs from a countersink, and when to use each. Learn key design tips, symbols, and common mistakes to avoid.
January 26, 2026
Read More >
Pad Thermal vs thermal paste cross-section showing gap, compression and contact area

What Is Pad Thermal and How Does It Work – Thermal Pad vs Paste, IC Pad, and PCB Thermal Relief Explained

Learn what Pad Thermal really means in electronics and how it works in different contexts. This guide explains the differences between thermal pads and paste, how IC thermal pads improve chip cooling, and how PCB thermal relief pads enhance solderability — with practical design tips for better heat dissipation and reliability.
January 26, 2026
Read More >

put your parts
into production today

All information and uploads are secure and confidential

Supports：

STEP

STP

SLDPRT

IPT

PRT

SAT

IGES

IGES

IGS

CATPART

X_T

OBJ

STL

Get Instant Quote