fast turn certificate
Get Quote

blog

Stay Updated With The Latest Insights, Trends, And Innovations In Electronics Manufacturing. Explore Expert Articles, Industry Analysis, And Technical Guides Curated By The fastturn Team.

PCB Drill Bit Types: two-edge two-flute, two-edge one-flute, and one-edge one-flute

PCB Drill Bit Types: ST vs UC and Regrinding Basics

Explore the main PCB drill bit types used in PCB manufacturing, including differences in shank diameter, drill structure, flute design, and ST vs UC geometry. This article also explains the basics of PCB drill bit regrinding, helping you understand how drill bit selection and regrind control affect hole wall quality, drilling stability, and tool life.
Hybrid high frequency PCB stackup showing Rogers RF layer, solid GND plane, FR-4 control layer, back-drilled and filled vias, return path

High Frequency PCB Guide: Rogers & RF Microwave Tips

Design and build high frequency PCB: material choices (Rogers vs FR-4), stackups, impedance tips, common pitfalls, and quick-turn prototyping.
December 24, 2025
Read More >
PCB Dielectric Stackup: raw prepreg vs pressed dielectric

PCB Dielectric Stackup: Single-Sheet vs Multi-Sheet Prepreg Guide

Learn how to choose PCB dielectric stackup—single vs. multi prepreg—using pressed thickness, resin content, and glass style to control impedance, cost, and manufacturability.
December 20, 2025
Read More >
Lines from 0–20 GHz showing higher loss for rough foils (JTCSHP) and lower loss for rolled foil.

Copper Foil Roughness in High-Speed PCBs: How It Causes GHz Signal Loss — and What to Do

Learn how copper foil roughness drives GHz signal loss in high-speed PCBs. Clear skin-effect primer, Df test highlights, and practical fixes—use low-profile or RTF foils to cut insertion loss.
December 18, 2025
Read More >
Side-by-side cross-sections showing standard foil vs reverse-treated foil (RTF) at ~100 μm scale.

Choosing the Best Copper Foil for High-Density PCBs: HTE, Low-Roughness & Reliability Explained

Quick guide to choosing copper foil for high-density PCBs: HTE, low-roughness, RTF and resin-specific foils to boost reliability, yield, and high-speed signals.
December 18, 2025
Read More >
Schematic diagram of dielectric constant measurement with capacitor plates and dielectric material.

Dielectric Constant and Permittivity: PCB Dk & Df for FR-4, Teflon

Dielectric constant and permittivity: Learn Dk vs Df, why FR-4 and Teflon differ, and how to pick low-loss PCB materials for reliable high-speed designs.
December 17, 2025
Read More >
UL 94 flammability vertical burn test setup with 0.5×5 in specimen above a 0.75 in blue flame

UL 94 V-0 / V-1 / V-2 for PCBs: Flammability Test Rules & How to Pass

Clear guide to UL 94 V-0/V-1/V-2 for PCBs: flammability criteria, test steps, material choices, and a checklist to help your board pass certification.
December 16, 2025
Read More >

put your parts
into production today

All information and uploads are secure and confidential

Supports：

STEP

STP

SLDPRT

IPT

PRT

SAT

IGES

IGES

IGS

CATPART

X_T

OBJ

STL

Get Instant Quote